The most common and basic fall stopping method of safe techniques when running high is the use of lanyard. Lanyard may have been manufactured with various types of rope and carbine. Providing the appropriate product at your work site will speed up your business and ensure that you work safely at the very beginning. Other precautions you may choose a lanyard with or without a shock absorber.
Here you should consider the environment in which you work, the level of your anchoring points and therefore the shock effect you will experience in the possible decline and take precautions just in case. The fall effect is a very long subject of shock effect and clean fall distance. In a possible decline; the correct hardware will hang with its strength if a secure connection is in a secure state, as pointed out by user standards, if a clean drop occurs.
In the event of this hazard, the user should not repeat a common mistake in using a shock-absorbing lanyard. The side rings of the seat belt are not suitable for hanging shock-absorbing lanyards. Even this behavior can lead to a more dangerous way of running high. The shock absorber extends to relieve the user's fall effect by removing the sutures until all the sutures are opened and reached their final length. If the single arm of a lanyard with a double shock absorber is attached to the side ring of the belt at the time of the fall, the shock absorber will not extend and will not be able to relieve the Stop Shock.
Fall-Stopping Lanyards
The length of the lanyard, which should be used to stop and prevent falling, should be no more than 2 m, along with the carbine and shock absorbers on it. Lanyard sizes can usually range from 115 cm to 200 cm. It is necessary to have a shock-absorbing body on a drop-stopping lanyard to reduce the negative effects of the forces that will occur as a result of the fall on the personnel. There are no shock absorbers in the lanyards. Do not use such vessels to stop falling as far as possible.
In addition, drop-stopping lanyards can be used in restraining according to the working area of the staff. It is absolutely imperative that the shock-absorbing body on the lanyards be used to limit the fall.
The most common and basic fall stopping method of safe techniques when running high is the use of lanyard. Lanyard may have been manufactured with various types of rope and carbine. Providing the appropriate product at your work site will speed up your business and ensure that you work safely at the very beginning. Other precautions you may choose a lanyard with or without a shock absorber.
Here you should consider the environment in which you work, the level of your anchoring points and therefore the shock effect you will experience in the possible decline and take precautions just in case. The fall effect is a very long subject of shock effect and clean fall distance. In a possible decline; the correct hardware will hang with its strength if a secure connection is in a secure state, as pointed out by user standards, if a clean drop occurs.
In the event of this hazard, the user should not repeat a common mistake in using a shock-absorbing lanyard. The side rings of the seat belt are not suitable for a shock-absorbing lanyard hang. Even this behavior can lead to a more dangerous way of running high. The shock absorber extends to relieve the user's fall effect by removing the sutures until all the sutures are opened and reached their final length. If the single arm of a lanyard with a double shock absorber is attached to the side ring of the belt at the time of the fall, the shock absorber will not extend and will not be able to relieve the Stop Shock.